Types Of Full Sleeved Sleeves

Full sleeved sleeves can also be classified into 3 categories:

The first is the sleeve bottom seam and the swing joint. The sleeve center line angle can only be set at 33~40 degrees.

 

The second way is to insert a triangle on the bottom of the sleeve and the corners of the clothes to expand the swing of the sleeve. The angle of the center line of the sleeve can only be set at about 40 degrees.

The top two types of sleeves are loose type, so they do not need to set the size of the sleeves.

 

The third one is to join the corners and pieces of the sleeves at the bottom of the sleeve and the joints of the clothes. As a result of the application of the congruent triangle filling method, the activity of the sleeves can be set to 45 degrees or so. The sleeves can be set up first, but the coordination of the AB= AB'can be achieved. The A point is ideally located at 1~3 cm below the BP point and the angular bisector of the arc of the front armhole bottom.